CNLINKO LP-16 Series M16 Waterproof metal Connectors IPX8

The waterproof and dustproof LP-16 industrial connector from CNLINKO is a robust and reliable solution for connecting equipment and cables in industrial applications. The housing is made of high quality metal and offers durable and robust performance in demanding environments. The M16 male connector and M16 female chassis connectors are available in a range of sizes, from 2 to 9 gold-plated solder contacts, to meet the requirements of different applications.

The LP-16 industrial male connector is also waterproof and dustproof and meets the IP67 protection rating. It is therefore ideal for use in damp or wet environments and offers protection against dirt and dust. Its ease of use and fast, stable connection make it a reliable choice even in demanding environments.

The LP-16 industrial chassis connectors female are the ideal complement to the plugs and provide a robust and reliable solution for mounting connectors in industrial applications. They are also made from high quality metal and offer durable and reliable performance. With their IP67 rating, they are also suitable for use in damp or wet environments. The LP-16 industrial chassis connectors female are available in different sizes to meet the requirements of different applications.

Examples of applications for the LP-16 industrial connector system are:

• Connection of industrial control and measuring equipment
• Connection of communication systems in damp or wet environments
• Connection of audio-visual equipment in outdoor applications
• Connection of medical equipment in damp or wet environments.

To solder an industrial connector to a cable, follow these steps:

1. First, the cable must be cut to the proper length. The connector should be placed as close as possible to the point where the cable will be plugged into the device or equipment.
2. Next, the cable must be prepared by removing the insulation from the wires. This can be done by either cutting the insulation or pulling the cable open with a pair of cable cutters. The wires should then be exposed and easily accessible.
3. Next, the connector must be prepared for the correct solder contact. To do this, unscrew the connector and thread the cable. The wires must be arranged in such a way that they are later connected to the correct contacts.
4. Now you can solder the connector to the cable with a soldering iron. To do this, you need to heat up the soldering iron and apply the solder to the wires and the soldering contacts. It is important to use enough solder and to make sure that the wires and the contacts are well connected.
5. After soldering is complete, one must screw the connector back together and allow the soldering iron to cool. One should then test the connector for proper operation by plugging it into the device or equipment and checking the connection.

It is important to work carefully and follow all steps exactly to make a reliable and safe connection.